Jailbreak PS3 Super Slim and 3000 On 4.86 And install HEN

In this tutorial we will show you how to install the latest Hybrid Firmware HFW 4.86.1, To be able to Jailbreak PS3 Super Slim and 3000 On 4.86 and install HEN, to have the possibility of installing after packages like Multiman For example.

With the HFW ( Hybrid Firmware ), you will be able to reuse all the PS3EXPLOIT functionalities, and therefore be able to install HAN on the PS3 Ultra Silm or Slim Versio 3xxx (which are not compatible with a permanent Custom Firmware CFW at the moment).

Prerequisites & Installation

To begin the procedures of installation the HEN, we will have to start by retrieving All the material and programs listed below:

• A PS3 in official firmware OFW 4.86 or Lower
• A computer (Windows Or Mac System).
• A USB Drive, formatted in FAT32 Mode.
• Internet access (preferably cable for the PS3);
• Download Hybrid Firmware update File from Here : HFW 4.86.1

A) First Step; Preparation of  Your USB Drive

First Step, We Have to Format The USB key in FAT32 mode.
In the Root of Your USB Key, create a folder named “PS3”, then recreate another folder, And named it “UPDATE” inside the PS3 folder.

B) The Second Step ; 
Now disconnect your USB key from your computer, turn on your PS3 console and insert it into the slot on the right side.
On the PS3 menu, Go to “Settings”, then Select “Update System”.
Select “Update by storage media”.
Finally confirm with the [Cross] key. Wait a moment before the console restarts.

After installing the Hybrid Firmware HFW 4.86.1, start by launching the web browser (internet browser). When the application has started, press the “Triangle” button on your controller to get to the Tools menu. From there, go to the “Home page” Settings and select “Use a blank page” option. Close After the web page and reopen it again.
Enter Now To the following address Web : ps3xploit.com.

Go Now to PS3HEN and select PS3HEN and choose HEN installer. PS3HEN Will install automatically. click on the Initialize HEN Installer, Then wait for the exploit to initialize on the console. if that doesn’t work, try clearing the cache and cookies of the ps3 browser, then repeat the procedure.
The operation may require several attempts before the installation is done correctly.

If the procedure is correctly installed, you should have the green line “HEN Installer Initialized successfully. Then, all you have to do is launch the exploit. To do this, click on install HEN. The PS3 will restart after a while. When your console is finished, you can verify that you are on HAN by going to the game column and looking for the PKG manager. You now have access to all the tools of HEN.

So that’s the end of this tutorial! We hope this has been clear. If you have Any information to share with us to improve the quality of this tutorial, or just any questions in case you get stuck at a step, please let us know in the comments!

The rest of How To Jailbreak PS3 Super Slim and 3000 On 4.86 is explained on the video below